{{{1}}} Dome

R2 Series Dome Requirements
Dome
	Ref#	Name	Color	Notes
	BC	Dome Base Color	{{{basecolor}}}
	DB1	Dome Button 1	{{{paccentcolor}}}
	DB2	Dome Button 2	{{{paccentcolor}}}
	HP1	Holo Projector 1	Aluminum
	HP2	Holo Projector 2	Aluminum
	HP3	Holo Projector 3	Aluminum
	PP1	Pie Panel 1	{{{paccentcolor}}}
	PP2	Pie Panel 2	{{{paccentcolor}}}
	PP3	Pie Panel 3	{{{paccentcolor}}}
	PP4	Pie Panel 4	{{{paccentcolor}}}
	PP5	Pie Panel 5	{{{paccentcolor}}}
	PP6	Pie Panel 6	{{{paccentcolor}}}
	P1	Panel 1	{{{paccentcolor}}}
	P2	Panel 2	{{{paccentcolor}}}
	P3	Panel 3	{{{paccentcolor}}}
	P4	Panel 4	{{{paccentcolor}}}
	P5	Panel 5 (Magic Panel)	{{{paccentcolor}}}
	P6	Panel 6	{{{paccentcolor}}}
	P7	Panel 7	{{{paccentcolor}}}
	P8	Panel 8	{{{paccentcolor}}}
	P9	Panel 9	{{{paccentcolor}}}
	P10	Panel 10	{{{paccentcolor}}}
	P11	Panel 11	{{{paccentcolor}}}
	P12	Panel 12	{{{paccentcolor}}}
	P13	Panel 13	{{{paccentcolor}}}
	P14	Panel 14	{{{paccentcolor}}}
	RE1	Radar Eye	{{{paccentcolor}}}
	TP1	Top Panel	{{{paccentcolor}}}
	DR	Dome Ring	{{{paccentcolor}}}
Additional Dome Notes:

Pie Panels: R2 units have six pie panels on the top of the dome. One of the pie panels must have a Holoprojectors (HPs) installed on it in the proper location. Template:R2DomePanels
Radar Eye should sit approximately 2.647" (vertical height) from the base of the outer dome. This is the most iconic and distinctive piece of the dome and provides the face of the droid.
Radar Eye Lens should fit cleanly and flush within the opening for the Radar Eye which has a diameter of 3 inches. The lens should not be clear.
Front Logic Display: Two of these are vertically stacked on the dome. These combine multiple components such as electronics, surrounds, and bezels. There should be at least 45 individual leds in a 5x9 array. The standard LED color used is WHITE and BLUE. Additionally, a Front Logic Display surround must be present. Not required but recommended is the use of logic bezels to provide better spacing of the LEDs.
Rear Logic Display (RLD):
Front PSI (Process State Indicator):
Rear PSI (Process State Indicator):
Dome Bumps There are two on the standard R2-unit on the back of the dome, just above and to the right of the rear PSI.:
Magic Panel:
Dome Ring:

{{{1}}}

Large Data Port (LDP): Located in the front, middle of the droid, at the base of the dome.
Utility Arms: There are 2 arms located in the upper middle of the body.
Front Vents: There are two vents on a standard R2-Unit.
Side Vents: There are two on a standard R2-Unit, one under each leg on the body.
Coin Slots: There is one strip on the standard R2-Unit in the front of the body.
Pocket Vents: There are two per standard R2-Unit, toward the bottom of the body in the front and back.
Coin Returns: There are three on a standard R2-Unit, one in the front, and two in the back toward the bottom of the main body.
Power Couplings: There are two per standard R2-Unit, one in the front center of the body at the bottom, and one in the back center at the bottom.
Octagonal Ports: There are two per standard R2-Unit, mounted toward the bottom of the body.
Skirt: The skirt is located on the base of the body.

{{{1}}}

Leg Components

Shoulder Horseshoes: There are two per standard R-Series Unit, mounted on each leg.
Shoulder Hub: There are two per standard R-Series Unit, mounted in the top middle section of each leg.
Booster Covers: There are two per standard R-Series Unit, mounted on each leg.
Leg Struts: There are two per standard R-Series Unit, mounted on each leg.
Leg Body Hub: There are two, located between the body and the leg.

Main Leg

Shoulder Hydraulics: There are two per standard R-Series Unit, mounted inside the long opening in the shoulder horseshoes.
Shoulder Buttons: There are four per standard R-Series Unit, mounted inside the small square openings in the shoulder horseshoes.
Ankle Bracelet: There are two per standard R-Series Unit, mounted on the leg above the ankle
Outer Ankle Sides: There are two per standard R-Series Unit.
Ankle Details: There are four per standard R-Series Unit, mounted to the front and backs of the outer ankles.
Ankle Cylinder Wedges: There are two per standard R-Series Unit, which connect the ankle cylinders to the outer ankle sides.
Ankle Cylinders: There are four per standard R-Series Unit, which mount to the ankle.
Ankle Cylinder Holders: There are four per standard R-Series Unit, which attach to the lower portion of the ankle and cradle the ankle cylinder.
Under Shoulder Details: There are four per standard R-Series Unit, that are mounted into the recessed area on the undersides of the main leg.

Outer Feet

Outer Foot Shell: Shell is complete, well formed and contains the following additional items.
Foot Side Plate:
Half Moon Details: There are four per standard R-Series Unit, one on the outside face of each outer foot shell, and one per side of the center foot shell.
Foot Details: All feet have appropriate foot details.
Foot Strips: There are six per standard R-Series Unit, each foot shell will have a foot strip mounted from and back in the middle.

Battery Box

Battery Boxes: There are two per standard R-Series Unit, which fit into the insides of the outer feet.
Battery Box Harnesses: There are four per standard R-Series Unit, which mount to the front recess on the battery box.
Foot Hoses: There are four per standard R-Series Unit, which connect the battery boxes to the outer foot shells.
Knurled Hose Fittings: There are four per standard R-Series Unit, and are on both ends of each Foot Hose

Center Foot (Optional)

If a center foot is used, it must have all of the following:
Foot Strips the center foot shell will have a foot strip mounted front and back positioned in the middle of the shell.
Ankle Cylinders: There are two on the standard R-Series center ankle, one on each side.
Ankle Cylinder Holders: There are two on the standard R-Series Unit center ankle, which attach to the lower portion of the ankle and cradle the ankle cylinder.
Center Foot Shell: Shell is complete, well formed and contains the following additional items.
Center Foot Details: Feet have appropriate details.
Half Moon Details: One per side of the center foot shell.