Template:R2 Dome

edit 

{{{1}}}

R2 Series Dome Requirements
Dome
	Ref#	Name	Color	Notes
	BC	Dome Base Color	{{{basecolor}}}
	DB1	Dome Button 1	{{{paccentcolor}}}
	DB2	Dome Button 2	{{{paccentcolor}}}
	HP1	Holo Projector 1	Aluminum
	HP2	Holo Projector 2	Aluminum
	HP3	Holo Projector 3	Aluminum
	PP1	Pie Panel 1	{{{paccentcolor}}}
	PP2	Pie Panel 2	{{{paccentcolor}}}
	PP3	Pie Panel 3	{{{paccentcolor}}}
	PP4	Pie Panel 4	{{{paccentcolor}}}
	PP5	Pie Panel 5	{{{paccentcolor}}}
	PP6	Pie Panel 6	{{{paccentcolor}}}
	P1	Panel 1	{{{paccentcolor}}}
	P2	Panel 2	{{{paccentcolor}}}
	P3	Panel 3	{{{paccentcolor}}}
	P4	Panel 4	{{{paccentcolor}}}
	P5	Panel 5 (Magic Panel)	{{{paccentcolor}}}
	P6	Panel 6	{{{paccentcolor}}}
	P7	Panel 7	{{{paccentcolor}}}
	P8	Panel 8	{{{paccentcolor}}}
	P9	Panel 9	{{{paccentcolor}}}
	P10	Panel 10	{{{paccentcolor}}}
	P11	Panel 11	{{{paccentcolor}}}
	P12	Panel 12	{{{paccentcolor}}}
	P13	Panel 13	{{{paccentcolor}}}
	P14	Panel 14	{{{paccentcolor}}}
	RE1	Radar Eye	{{{paccentcolor}}}
	TP1	Top Panel	{{{paccentcolor}}}
	DR	Dome Ring	{{{paccentcolor}}}
Additional Dome Notes:

Pie Panels: R2 units have six pie panels on the top of the dome. One of the pie panels must have a Holoprojectors (HPs) installed on it in the proper location. Template:R2DomePanels
Radar Eye should sit approximately 2.647" (vertical height) from the base of the outer dome. This is the most iconic and distinctive piece of the dome and provides the face of the droid.
Radar Eye Lens should fit cleanly and flush within the opening for the Radar Eye which has a diameter of 3 inches. The lens should not be clear.
Front Logic Display: Two of these are vertically stacked on the dome. These combine multiple components such as electronics, surrounds, and bezels. There should be at least 45 individual leds in a 5x9 array. The standard LED color used is WHITE and BLUE. Additionally, a Front Logic Display surround must be present. Not required but recommended is the use of logic bezels to provide better spacing of the LEDs. Front PSI (Process State Indicator):
Magic Panel:
Rear PSI (Process State Indicator):
Dome Bumps: There are two on the standard R2-unit on the back of the dome, just above and to the right of the rear PSI.
Rear Logic Display (RLD):
Dome Ring: