R5 Series: Difference between revisions

From Droid Reference Library
Jump to navigation Jump to search
Line 30: Line 30:
==Legs / Feet==
==Legs / Feet==


'''1.''' '''Shoulder Horseshoes''' These are called horseshoes because they resemble an upside down horseshoe.  
'''1.''' '''Shoulder Horseshoes''' There are two per standard R5-Unit, mounted on each leg.


'''2.''' '''Shoulder Hub''' These are aluminum (or aluminum colored) parts mounted in the round hole created by the shoulder horseshoes.  
'''2.''' '''Shoulder Hub''' There are two per standard R5-Unit, mounted in the top middle section of each leg.


'''3.''' '''Booster Covers''' Large structures on the side of the leg that (in the movies) split apart to extend Artoo's rocket boosters.  
'''3.''' '''Booster Covers''' There are two per standard R5-Unit, mounted on each leg.


'''4.''' '''Leg Struts''' Cylindrical lathed pipes that insert into, and run the length of, the booster cover. At the top they appear connected to a box on an angle.
'''4.''' '''Leg Struts''' There are two per standard R5-Unit, mounted on each leg.


'''5.''' '''Main Leg''' The main structural part of the leg itself is the base onto which the detail parts are attached.
'''5.''' '''Main Leg'''  


'''6.''' '''Shoulder Hydraulics''' Metallic tube/pipe structure which mount inside the long opening in the shoulder horseshoes.
'''6.''' '''Shoulder Hydraulics''' There are two per standard R5-Unit, mounted inside the long opening in the shoulder horseshoes.


'''7.''' '''Shoulder Buttons''' Small metallic cylinders which mount into the two small openings on the shoulder horseshoes. These each have three holes and resemble metal bottle caps.  
'''7.''' '''Shoulder Buttons''' There are four per standard R5-Unit, mounted inside the small square  openings in the shoulder horseshoes.  


'''8.''' '''Ankle Bracelet''' Thin metal plate which caps the top of the ankle.
'''8.''' '''Ankle Bracelet''' There are two per standard R5-Unit, mounted on the leg above the ankle


'''9.''' '''Outer Ankle Sides''' Also referred to as 'beefy ankle pieces' these refer to the curved portion of the ankle that faces away from the body.  
'''9.''' '''Outer Ankle Sides''' There are two per standard R5-Unit.


'''10.''' '''Ankle Details''' Angular flat parts which are attached to the front and backs of the ankles.  
'''10.''' '''Ankle Details''' There are four per standard R5-Unit, mounted to the front and backs of the outer ankles.  


'''11.''' '''Ankle Cylinder Wedges''' Triangular shaped wedges which connect the ankle cylinders to the ankle sides.  
'''11.''' '''Ankle Cylinder Wedges''' There are two per standard R5-Unit, which connect the ankle cylinders to the outer ankle sides.  


'''12.''' '''Ankle Cylinders''' Metal-colored cylindrical shaped pipes that mount to the ankle.  
'''12.''' '''Ankle Cylinders''' There are four per standard R5-Unit, which mount to the ankle.  


'''13.''' '''Ankle Cylinder Holders''' Crescent-shaped parts which attach to the lower portion of the ankle and cradle the ankle cylinder.  
'''13.''' '''Ankle Cylinder Holders''' There are four per standard R5-Unit, which attach to the lower portion of the ankle and cradle the ankle cylinder.  


'''14.''' '''Under Shoulder Details''' Small structures consisting of a knurled cylindrical shape with smaller pipes attached at a 90 degree angle. Metallic in color, they attach into the recessed area on the undersides of the main leg.
'''14.''' '''Under Shoulder Details''' There are four per standard R5-Unit, that are mounted into the recessed area on the undersides of the main leg.


'''15.''' '''Main Foot shell''' Trapezoidal shaped foot covering.
'''15.''' '''Main Footshell'''  


'''16.''' '''Foot Side Plate''' Plate which attaches to the foot shell sides, and usually through which the foot motors and drivetrain is accessed. These are usually part of the foot shells, and have several detail parts attached to them.
'''16.''' '''Foot Side Plate'''  


'''17.''' '''Half Moon Details''' Half moon shaped part which attaches to the foot side plates.  
'''17.''' '''Half Moon Details''' There are four per standard R5-Unit, one one the outside face of each outer foot shell, and one per side of the center foot shell.


'''18.''' '''Foot Details''' Small raised areas which attach to the side plates.
'''18.''' '''Foot Details''' All feet have foot details.


'''19.''' '''Battery Boxes''' Boxes with curved top and bottom sections, which fit into the insides of the outer feet.  
'''19.''' '''Battery Boxes''' There are two per standard R5-Unit, which fit into the insides of the outer feet.  


'''20.''' '''Battery Box Harnesses''' Metallic structures which attach to the upper and lower overhangs on the battery boxes, and give the appearance of latches.  
'''20.''' '''Battery Box Harnesses''' There are four per standard R5-Unit, which mount to the front recess on the battery box.  


'''21.''' '''Foot Hoses''' Braided metal hoses which connect the battery boxes to the outer foot shells.  
'''21.''' '''Foot Hoses''' There are four per standard R5-Unit, which connect the battery boxes to the outer foot shells.  


'''22.''' '''Knurled Fittings''' Knurled metallic fittings into which the foot hoses insert.
'''22.''' '''Knurled Fittings''' There are four per standard R5-Unit, and are on both ends of each Foot Hose


'''23.''' '''Foot Strips''' Thin aluminum strips which attach to the front and back of the feet. On the fronts of the feet, the knurled fittings insert into these foot strips.
'''23.''' '''Foot Strips''' There are six per standard R5-Unit, each foot shell will have a foot strip mounted from and back in the middle.




[[Category:Astromechs]]
[[Category:Astromechs]]

Revision as of 22:44, 17 May 2017

Required Droid Components

The standard R5 series droid will consist of the following details. Paint scheme will be determined by the model.

Dome

Body

1. Large Data Port (LDP) Located in the front, middle of the droid, at the base of the dome.

2. Utility Arms There are 2 arms located in the upper middle of the body.

3. Front Vents There are two vents on a standard R5-Unit.

4. Side Vents There are two on a standard R5-Unit, one under each leg on the body.

5. Coin Slots There is one strip on the standard R5-Unit in the front of the body.

6. Pocket Vents There are two per standard R5-Unit, toward the bottom of the body in the front and back.

7. Coin Returns There are three on a standard R5-Unit, one in the front, and two in the back toward the bottom of the main body.

8. Power Couplings There are two per standard R5-Unit, one in the front center of the body at the bottom, and one in the back center at the bottom.

9. Octagonal Ports There are two per standard R5-Unit, mounted toward the bottom of the body.

10. Skirt The skirt is located on the base of the body.

Legs / Feet

1. Shoulder Horseshoes There are two per standard R5-Unit, mounted on each leg.

2. Shoulder Hub There are two per standard R5-Unit, mounted in the top middle section of each leg.

3. Booster Covers There are two per standard R5-Unit, mounted on each leg.

4. Leg Struts There are two per standard R5-Unit, mounted on each leg.

5. Main Leg

6. Shoulder Hydraulics There are two per standard R5-Unit, mounted inside the long opening in the shoulder horseshoes.

7. Shoulder Buttons There are four per standard R5-Unit, mounted inside the small square openings in the shoulder horseshoes.

8. Ankle Bracelet There are two per standard R5-Unit, mounted on the leg above the ankle

9. Outer Ankle Sides There are two per standard R5-Unit.

10. Ankle Details There are four per standard R5-Unit, mounted to the front and backs of the outer ankles.

11. Ankle Cylinder Wedges There are two per standard R5-Unit, which connect the ankle cylinders to the outer ankle sides.

12. Ankle Cylinders There are four per standard R5-Unit, which mount to the ankle.

13. Ankle Cylinder Holders There are four per standard R5-Unit, which attach to the lower portion of the ankle and cradle the ankle cylinder.

14. Under Shoulder Details There are four per standard R5-Unit, that are mounted into the recessed area on the undersides of the main leg.

15. Main Footshell

16. Foot Side Plate

17. Half Moon Details There are four per standard R5-Unit, one one the outside face of each outer foot shell, and one per side of the center foot shell.

18. Foot Details All feet have foot details.

19. Battery Boxes There are two per standard R5-Unit, which fit into the insides of the outer feet.

20. Battery Box Harnesses There are four per standard R5-Unit, which mount to the front recess on the battery box.

21. Foot Hoses There are four per standard R5-Unit, which connect the battery boxes to the outer foot shells.

22. Knurled Fittings There are four per standard R5-Unit, and are on both ends of each Foot Hose

23. Foot Strips There are six per standard R5-Unit, each foot shell will have a foot strip mounted from and back in the middle.

Retrieved from "https://drl.droidbuilders.net/index.php?title=R5_Series&oldid=77"