Template:R Series Legs

edit 

{{{1}}}

Leg Components

Work pendingShoulder Horseshoes: There are two per standard R-Series Unit, mounted on each leg.
Work pendingShoulder Hub: There are two per standard R-Series Unit, mounted in the top middle section of each leg.
Work pendingBooster Covers: There are two per standard R-Series Unit, mounted on each leg.
Work pendingLeg Struts: There are two per standard R-Series Unit, mounted on each leg.
Work pendingLeg Body Hub: There are two, located between the body and the leg.

Main Leg

Work pendingShoulder Hydraulics: There are two per standard R-Series Unit, mounted inside the long opening in the shoulder horseshoes.
Work pendingShoulder Buttons: There are four per standard R-Series Unit, mounted inside the small square openings in the shoulder horseshoes.
Work pending Ankle Bracelet: There are two per standard R-Series Unit, mounted on the leg above the ankle
Work pendingOuter Ankle Sides: There are two per standard R-Series Unit.
Work pendingAnkle Details: There are four per standard R-Series Unit, mounted to the front and backs of the outer ankles.
Work pendingAnkle Cylinder Wedges: There are two per standard R-Series Unit, which connect the ankle cylinders to the outer ankle sides.
Work pendingAnkle Cylinders: There are four per standard R-Series Unit, which mount to the ankle.
Work pendingAnkle Cylinder Holders: There are four per standard R-Series Unit, which attach to the lower portion of the ankle and cradle the ankle cylinder.
Work pendingUnder Shoulder Details: There are four per standard R-Series Unit, that are mounted into the recessed area on the undersides of the main leg.

Outer Feet

Work pendingOuter Foot Shell: Shell is complete, well formed and contains the following additional items.
Work pendingFoot Side Plate:
Work pendingHalf Moon Details: There are four per standard R-Series Unit, one on the outside face of each outer foot shell, and one per side of the center foot shell.
Work pendingFoot Details: All feet have appropriate foot details.
Work pendingFoot Strips: There are six per standard R-Series Unit, each foot shell will have a foot strip mounted from and back in the middle.

Battery Box

Work pendingBattery Boxes: There are two per standard R-Series Unit, which fit into the insides of the outer feet.
Work pendingBattery Box Harnesses: There are four per standard R-Series Unit, which mount to the front recess on the battery box.
Work pendingFoot Hoses: There are four per standard R-Series Unit, which connect the battery boxes to the outer foot shells.
Work pendingKnurled Hose Fittings: There are four per standard R-Series Unit, and are on both ends of each Foot Hose

Center Foot (Optional)

If a center foot is used, it must have all of the following:
Work pendingFoot Strips the center foot shell will have a foot strip mounted front and back positioned in the middle of the shell.
Work pendingAnkle Cylinders: There are two on the standard R-Series center ankle, one on each side.
Work pendingAnkle Cylinder Holders: There are two on the standard R-Series Unit center ankle, which attach to the lower portion of the ankle and cradle the ankle cylinder.
Work pendingCenter Foot Shell: Shell is complete, well formed and contains the following additional items.
Work pendingCenter Foot Details: Feet have appropriate details.
Work pendingHalf Moon Details: One per side of the center foot shell.

No description.

Template parameters

Parameter		Description	Type	Status
title	title	no description	Unknown	optional